VF Tuner 4.6/4.7 Supported ECU list and Table list

[VFTuner]

89663-60X90
89663-60X91


upcoming ECUs:
89663-0C770
89663-30J30
89663-30K21
89663-360B6
89663-0C533

[mZiggy]

Came across a 89663-60J90 this evening, MY13 GX460. Couldn't read it out, I'm assuming these GX's are like the 4runners? Need an ECU in hand to pull what you need to develop support for it?

[VFTuner]

Came across a 89663-60J90 this evening, MY13 GX460. Couldn't read it out, I'm assuming these GX's are like the 4runners? Need an ECU in hand to pull what you need to develop support for it?

We will check our database and see if we have it, if we do we will add it.
If not, yes they are a bench read only.

[Running farmer]

how do I found these numbers on a 2017 tundra?

[tonered]

how do I found these numbers on a 2017 tundra?

Do you have at the vF software and a Tactrix / OVT adapter?

Sorry for the assumption, but if you don't, you can use the Carista or OBD Fusion apps with an OBD adapter to get the ECU IDs. Some standalone OBD scanners can pull ECU IDs also. You have to get to the ECU details, which is a deeper dive than checking codes.

[Running farmer]

I found some number. First is cal ID 30cm1201 and 50c85001 and cvn 8c769c7d and 88d6adf Do any this numbers mean anything?

[VFTuner]

I found some number. First is cal ID 30cm1201 and 50c85001 and cvn 8c769c7d and 88d6adf Do any this numbers mean anything?

30CM12 is your calibration ID.
we might have this one, I'll need to check.

[Running farmer]

Ok just to be straight I have made changes to my truck. Headers ,4.88 gears . Will this be safe or will I have to have it tuned or can I check just the air fuel mixture. Thanks Arnie

[Frank]

My gx460 2015 made in Japan, for outside USA market and the calibration ID is 89663-60Q91. Is there going to be tune pack for that one?

[VFTuner]

My gx460 2015 made in Japan, for outside USA market and the calibration ID is 89663-60Q91. Is there going to be tune pack for that one?

That ECU is supported. No tune packs yet though.

[mJruiz157]

What is the progress on the tunes? I absolutely love our GX, but it desperately needs more power. What sort of increases are you aiming for? I know how many people would love a tune.

[Running farmer]

Hi Matt I see your getting the 5.7 done are the 4.6 after that? Thanks

[mZiggy]

Has support for 89663-60J90, MY13 GX460, become available yet?

[Lsman]

Just posting to keep track, and also can techstream pull the calibration ID?

[ktbell444]

Yes, Techstream can pull the ID.

[tonered]

Sorry. I missed this one.

Thanks, ktbell444 !

[tonered]

Just posting to keep track, and also can techstream pull the calibration ID?

I usually check it in vF / OVT, but:

-- Connect to Vehicle
-- From the Main Menu, select Health Check
-- Only select the Powertrain ECUs
-- Stay in Oflline Mode
-- See the green highlight below for my 04B14 ECU.

BTW. Ignore the 4WD ECU Fault. That is from a bad sequence on lapoltba 's 2LM.

[ktbell444]

Thanks for the instructions! I tried to find them while I was on break at work, didn't have enough time.

[tonered]

You're welcome!